Introducing the Ultralight Moblite7 75mm Brushless Whoop
Get ready to experience the lightest, most efficient 1S 75mm brushless whoop on the market - the Moblite7 by Happymodel. This remarkable drone is designed for maximum performance, featuring an ultra-lightweight design, powerful and efficient EX0802 brushless motors, and an integrated AIO Flight Controller. With a low-profile canopy and an adjustable VTX power ranging from 25mw to 200mw, the Moblite7 is a force to be reckoned with on the racecourse. Get your hands on this revolutionary FPV racing drone and start flying like never before.
Key Features of The Moblite7
Flight Controller and Sensor Change
Important Notice: Due to the MPU6000 being out of production, the flight controller and related drone will gradually be replaced by ICM20689 or BMI270.
Bag Material Change
Important Notice: As of July 18th, 2021, due to the serious stock shortage of the previous bag materials, Happymodel has now changed to using a soft fabric material. Our current stock is mixed and will be sent randomly.
Ultralight Design and High Perfomance
- Overall weight of 19.5g without battery and 36g with the original 1S 650mAh Lipo battery
- EX0802 19000KV brushless motors for powerful and efficient flights
- Integrated, ultra-light 1S AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
Customizable and User-Friendly
- Low profile canopy design for improved speed and agility
- Adjustable VTX power with 25mw to 200mw options
- Failsafe support for added safety
- Smartaudio Ready for convenient configuration
Moblite7 Package Contents
The Moblite7 FPV Racing Drone comes with everything you need to start racing, including:
- 1 x Happymodel Moblite7 75mm Whoop RC FPV Racing Drone
- Option 1: 1 x DiamondF4 FR built-in SPI Frsky Receiver or Option 2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
- 4 x EX0802 KV19000 Unibell Brushless Motors
- 1 x HQPROP 40MMX2 Propeller (4cw+4ccw)
- 1 x Runcam Nano 3 FPV Camera
- 1 x Built-in 5.8G 40ch 25mw-200mw VTX
- 2 x 1S 650mAh Lipo Batteries
- 1 x Propeller Disassemble Tool
- 1 x Screwdriver
- 1 x Happymodel Carry Case
Product Specifications
Motor |
Model: EX 0802 19000KV ( New Unibell Version) Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Weight(g): 1.7g
No.of Cells(Lipo): 1S only |
Flight Controller |
(Frsky SPI RX Version) DiamondF4 FR FC Firmware Target: CrazybeeF4FR MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 Or ICM20689 or BMI270. (SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
|
Onboard 4in1 ESC |
MCU Upgraded to EFM8BB21
Power Supply: 1S LiPo/LiPo HV
Current: 5A continuous, peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory Firmware: O_H_50_REV16_8.HEX
Default Protocol: DSHOT600
|
Onboard Frsky SPI D8 receiver Version |
SPI BUS Receiver Frsky D8 Compatible Compatible Non EU transmitter D8 model
Channels: 8CH
Failsafe Support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
|
Onboard Flysky Receiver Version
|
SPI BUS Receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8CH (AFHDS) or 14CH (AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe Support
|
Onboard 5.8G 40CH 25-200mW VTX |
Output Power: 25mw~200mw switchable Frequency: 40CH
Input Voltage: 3.3V 5.5V
Current Consumption: 300mA (type)
Frequency: 5.8GHz 5bands 40 channels (include Race band)
Smartaudio Ready
|
Runcam Nano 3 FPV Camera |
Model: RunCam Nano 3 Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm |
Lipo Battery |
Capacity: 650mAh Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g
Connector: PH2.0
Quantity: 2 PCS
|
Product Images
Free
3-7 Day
Tracked Delivery
Easy 30 Day Returns
Black Friday Event - Best Price Guarantee
